Modine Hot Dawg Garage Heater - 60K BTU/Direct Spark Ignition/LP/Separated Combustion/Blower/Single Stage w/Aluminized Steel Heat Exchanger

Modine Hot Dawg Garage Heater - 60K BTU/Direct Spark Ignition/LP/Separate Combustion/Blower/Single Stage w/Aluminized Steel Heat Exchanger

The Modine Hot Dawg LP Garage Heater with built-in Blower is your answer to staying warm and productive in even the most challenging work environments.  Fueled by Liquid Propane (LP), this heater delivers a dependable 60,000 BTU output, efficiently heating workshops, storage areas, and similar medium-sized spaces. Unlike traditional heaters, the Hot Dawg LP tackles tough conditions with its innovative separated combustion system, making it ideal for environments prone to dust, dirt, or high humidity.

Features

• Draws combustion air from outside the workspace, ensuring the unit always has plenty of fresh, clean air to breathe

• Reduces common concerns about dusty, dirty, or humid applications, providing more exceptional durability and reduced maintenance

• The sealed compartment protects the combustion gas valve, ignition control, manifold, and burners from the environment

• Factory assembled, certified separated combustion saves installation time

• Low-profile, lightweight design easily installs 1″ from the ceiling with only two angle brackets (included)

• Field fuel conversion kits are available

• Finger-proof fan guards on all units

• Reduces the need for maintenance with the permanently lubricated motor

• 100% shut-off with continuous retry to allow for safe ignition in the event the unit doesn’t light on the first try

• Right or left-hand controls available on 30-75 BTU Models by rotating unit 180 degrees

• Power vented model simplifies side-wall or roof venting with the small-diameter vent pipe

• 4" vent & combustion air connection

• Liquid Propane

• 60,000 BTU

• Direct spark ignition

• Single stage - on/off operation

• Aluminized steel heat exchanger

Specifications

What Our Experts Think

• Optimal 60K BTU Heating: Perfect for heating medium-sized garages, workshops, or residential spaces, offering efficient warmth while managing energy consumption.
• Separated Combustion: Draws combustion air from outside, ensuring cleaner, fresher indoor air by preventing contaminants from entering the space.
• Aluminized Steel Heat Exchanger: Provides superior corrosion resistance, ensuring the heater's durability and long-term, reliable performance.
• Direct Spark Ignition: Quick, energy-efficient startups that minimize fuel consumption, providing consistent heat without delay.
• Liquid Propane (LP) Compatibility: Ideal for areas without natural gas access, offering a convenient and flexible solution for propane-powered heating.
• Single-Stage Operation: Simple to use, offering reliable and consistent heating with minimal maintenance.
• Blower for Better Air Circulation: The built-in blower ensures even heat distribution, enhancing comfort throughout the space.
• Quiet and Compact: Space-saving design and quiet operation make it perfect for indoor applications where noise and space are important factors.

Q&A

Q: What is the heating capacity of this unit?
A: The Modine Hot Dawg 60K BTU provides 60,000 BTU, ideal for heating spaces up to 1,000 sq. ft.

Q: What type of ignition system does it use?
A: It uses Direct Spark Ignition (DSI) for reliable and efficient startups.

Q: What fuel type does this heater use?
A: This model operates on Liquid Propane (LP) fuel.

Q: What is separated combustion, and how does it benefit the heater?
A: Separated combustion draws fresh air from outside for combustion, which enhances safety, improves energy efficiency, and prevents indoor air contamination.

Q: Does this model have a blower?
A: Yes, the heater is equipped with a blower to help distribute heat more effectively throughout the space.

Q: What is the heat exchanger made of?
A: The heat exchanger is made from aluminized steel, offering durability and corrosion resistance for long-lasting performance.

Q: Is it suitable for residential use?
A: Yes, this model is ideal for residential garages, workshops, and small to medium-sized spaces.

Q: How does the single-stage system work?
A: The heater operates at a single, consistent heat level, providing straightforward and reliable heating.

Q: Is professional installation required?
A: Yes, professional installation is recommended to ensure proper venting, safe operation, and compliance with local building codes.

Q: What safety features are included?
A: The unit includes flame failure shutoff and overheat protection to ensure safe operation.

Q: Is it quiet during operation?
A: Yes, it operates quietly and efficiently, making it ideal for both home and work environments.

Maintenance Tips

• Clean the Heater: Regularly clean the exterior, blower, and interior components to remove dust and debris that could affect airflow and efficiency.
• Inspect Gas Lines: Check LP gas connections for leaks using a soapy water solution. If any leaks are found, repair them immediately.
• Test Ignition System: Perform a monthly test of the direct spark ignition system to ensure reliable ignition.
• Monitor Flame Quality: Ensure the flame is steady and blue. If the flame is yellow or flickers, clean the burner or check for potential combustion issues.
• Clear Ventilation: Since the heater uses separated combustion, inspect both the intake and exhaust vents to ensure they are clear of any obstructions.
• Inspect Aluminized Steel Heat Exchanger: Annually check the heat exchanger for wear, corrosion, or cracks, as this is crucial for efficient heat transfer.
• Clean the Blower Fan: Clean the blower fan and ensure it’s running smoothly to maintain airflow and prevent overheating.
• Check for Obstructions: Regularly inspect the combustion chamber and burner for debris or soot, which could affect heating efficiency.
• Schedule Annual Professional Service: Have a certified technician perform a full annual inspection to ensure all parts, including the blower, burner, ignition system, and heat exchanger, are functioning optimally.